Hypcit Primary Current Injection Test Set, Primary Injection Test Equipment

Primary Current Injection Tester HYPCIT

Introduction

HYPCIT series primary current injection tester is applied in power system for circuit breaker test, protection system test and current transformer test. The current injection tester generates a high current from power supply to simulate the rated current or fault current in the primary circuit of power equipment. 

Features
1) The high current output is injected into main circuit of the running line to simulate the fault current, and then the protection system can be tested whether it will be operated according to the design.
2) The high current output is injected into the primary side of the current transformer, and then the induced current is tested from the secondary side by an error measuring instrument to detect the current transformer ratio difference and phase shift.
3) High current output is injected to the main circuit of circuit breaker to simulate the rated current in primary. Then check the stability of circuit breaker according to the temperature rise procedure.
4) It is considered as a AC high current source in power equipment or cable test.
 

1. Power supply: AC220V or AC 400V, 45Hz~65Hz.  

   The power supply voltage depends on the power output capacity. Detail information is as table 1.

2. Typical output current: 500A or 1000A or 2000A 

    Typical output capacity: 3KVA or 5KVA or10KVA or15KVA 

    It can be customized according to your requirements from above specs.

3. Impendence voltage: 8%

4. Idle current: 6%

5. Current distortion <5%

6. Current is measured from the secondary of current transformer which is installed in the internal of the current booster. 
    The display unit is 4 and 1/2 digitals current meter. Maximum measurement error 0.5%RDG+5D.

7. Timer indication of test running is an optional configuration. The timer could be customized according to the requirement of customer from the follow list:

    1)4 digital timer from 0~9999s / 0~999.9s /0~99.99s, accuracy 0.5%RDG+5D

    2)5 digital timer from 0~99999s / 0~9999.9s /0~999.99s, accuracy 0.2%RDG+2D

    3)6 digital timer from 0~999999s / 0~99999.9s /0~9999.99s, accuracy 0.1%RDG+1D

8. Work temperature: 0~40ºC   Humidity: <90%
 

Table 1 Detail configurations for different models of current injection tester

Other products:
Circuit Breaker Analyzer / Contact Resistance Tester / On Load Tap Changer Tester / Circuit Breaker Vacuum Degree Tester / Insulating Oil Tester / CT PT Analyzer / Transformer Winding Resistance Tester / Sweep Frequency Response Analyzer / Transformer Load and No-load tester / Transformer Ratio Tester / Primary Current Injection Test Set / Frequency Adjustable Series Resonance Test Set / High Voltage Divider / High Voltage Generator / VLF tester / Wireless HV Phase Tester / MOA Metal Oxide Arrester MOA Tester / Hipot Tester / Relay Tester / Insulation Tester / Grounding Resistance Tester

Packaging & Shipping


logistics

Certification Show

Company Profile


Customers Visiting


Exhibition

Technical Support



Contact Us